Unit UCB-331, Instruction Manual

ENGLISH

5

APPLIANCE DESCRIPTION

1.

Base

2.

3-Setting Switch  (0-1-2)

3.

Attachments

3.1

Round Brush 45 mm

3.2

Brush

3.3

Volume Finger

3.4

Concentrator

4.

Air Openings

5.

Release Button

6.

Power Cord

APPLIANCE USE

As a general guide use the HIGH heat and speed settings for rough dry-

ing and for thicker, heavier hair.

Use the LOW heat and speed settings for finer hair and for more precise

control when styling. 

•

Fully unwind the Power Cord (6).

•

Before plugging in the appliance, make sure the 3-Setting Switch

(2) is set to position «0».

•

Wash and condition the hair, then towel dry the hair thoroughly. Do

not use the styler on hair, which is dripping with water.

•

To fit any Attachment (3), simply press the Release Button (5) to

remove Attachment (3) and pull it away from the base. To reattach,

fit the Attachment (3) onto the Base (1) and snap it into place.

Before changing the Attachments (3), let the appliance to cool

down.

•

Insert the plug into an earthed contact socket 230 V, 50 Hz.

•

Adjust to the desired blowing strength with the 3-Setting Switch:

- «0» – OFF;