English
10
MAX/MIN MEMORY
Press ”
MEM
”
5
button to view max & min memory
of temperature & humidity. To clear Max/Min memo-
ry, press ”
CLEAR
”
6
button during Max/Min Display
ALARM 1, ALARM 2 SETTING
Select AL 1 or AL 2 (K) bby pressing the AL
7
key.
Then hold “AL“
7
for 3 seconds. Press “+
3
, –
4
“
to enter the desired value and press “AL“
7
to
confi rm setting.
To view alarm time 1 and 2, simply press “AL”
7
button to read AL 1 and AL 2. The alarm time will
display for 5 seconds and resume to normal clock
(M) thereafter.
To turn AL 1, AL 2 (K) on and off, press “ +
3
(bell)“
button. The unit will provide Crescendo alarm which
last for 2 minutes.
SNOOZE ALARM
During alarm sound, either press „LIGHT/ Zz“
8
button to trigger snooze alarm, or press another but-
ton (AL
7
, SET
2
, +
3
or -
4
) to stop the alarm for
1day. If snooze function is activated, „Zz“ and the
bell icon (K) will keep fl ashing. At that moment, eit-
her wait for 5 minutes and the alarm will be turned
on again, or press another button (AL
7
, SET
2
, +
3
or -
4
) to disable the snooze function.
LOW BATTERY INDICATION
Low battery indication is available for the home unit
(G) itself and of the remote channel (F). Replace the
batteries and follow the setup procedure as menti-
oned in this instruction manual.
SPECIFICATIONS
Range of temperature measurement:
Indoor unit:
-5 C to 50 C (32F to 122F)
20% to 99% RH
Remote sensor:
-20 C to 60 C (14F to 140F)
20% to 99% RH
Temperature Accuracy:
+/- 1 C in the range of 0C ~ 50C
+/- 1.5 C in other range
Humidity Accuracy:
+/- 5% in the range of 40% ~ 80%
+/- 8% in the range of 30~40% or 80%~ 95%
N/A below 30% or above 95%
Transmission:
30M (100 ft.) open area, RF433 MHz
Resolution:
0.1 degree C, 1%RH
Clock:
Quartz pre-45 sec per month when out of RCC
Power for main unit:
2 x 1,5 V
Type of battery in main unit:
2 x AA / LR6 / AM3
Power for remote sensor:
2 x 1,5 V
Type of battery in remote sensor: 2 x AAA / LR03 / AM4
313514_Manual.indd 10
20.12.12 10:45
