English
10
CLOCK & CALENDAR
Press [CLOCK]
to toggle display between time,
calendar and day of the week.
Hold [CLOCK]
button to enter clock setting mode.
Using [UP]
or [DOWN]
to adjust and [CLOCK]
to confirm, the following values can be set in
sequence:
12/24hr format > Hr > Min > Yr > D/M or M/D
format > Month > Date > Weather Forecast > EXIT
HOME TIME, WORLD (ZONE) TIME
Hold [ZONE]
to enter world (zone) time setting
mode. Press [UP]
or [DOWN]
to enter the desi-
red hour offset value from –12 to +12 hours (Switzer-
land +1). Press [CLOCK]
to confirm and exit.
Press [ZONE]
button to toggle between home (ra-
dio-controlled) time and world (zone) time. “ZONE”
icon appears when world (zone) time is selected.
When zone time is not used, set zone time to “0”.
ALARM SETTING
Press [ALARM]
to show alarm time and “AL.”
icon will appear. Press again to enable or disable
the alarm. Bell icon “ ”
(I)
appears when alarm is
enabled.
Hold [ALARM]
to enter alarm time setting mode.
Press [UP]
or [DOWN]
to enter the desired Hr/
Min values and press [ALARM]
to confirm setting.
SNOOZE & BACKLIGHT
When alarm is going off, press [SNOOZE/CHANNEL/
LIGHT]
to trigger snooze alarm and “Zz” icon will
appear. To stop alarm for one day, press [ALARM]
key.
Press [SNOOZE/CHANNEL/LIGHT]
for an exten-
ded backlight if adapter is not connected.
Press [LIGHT ON/OFF]
to turn on or off the back-
light when adapter is connected.
LOW BATTERY INDICATION
Low battery indication
(F)
is available for the home
unit itself and all of the 3 remote channels. Replace
the batteries and follow the setup procedure in this
instruction manual.
BATTERY DISPOSAL
Replace only with the same or equivalent type
recommended by the manufacturer.
Please disposal of old, defective batteries in an
environmentally friendly manner in accordance with
the relevant legislation.
SPECIFICATIONS
Power supply of main unit:
3 x 1.5V or with 6.0 V power supply
Battery type of main unit:
3 x AAA / LR03 / AM4
Temperature range of main unit:
0 ºC to +50ºC
Humidity range of main unit:
20% to 99% RH
Operating temperature:
0 ºC – 50 ºC
Temperature display resolution:
0.1 ºC
Humidity resolution:
1%
Power supply of remote sensor:
2 x 1.5V
Battery type of remote sensor:
2 x AAA / LR03 / AM4
Temp. Range of remote sensor (W186-F):
–20 ºC to +60ºC
Transmission frequency:
433 MHz
Max. range (under opt. conditions):
30m
Number of remote sensors:
3
313508_W193_Manual_130215.indd 10
27.02.13 12:49
