Direct charging instructions
Plug the Type C USB data cable into one end of the power
adapter and directly connect one end of the Type C USB data
cable to the charging socket of the device for charging. The
charging indicator on the device in charging slate is red, and the
red light is
off
after the charger is fully charged.
Power Adapter
Type-C Data Line
Battery Operation
The device battery is Li-ion type battery and not removable,
which should only be charged by using original power supply.
Do not store battery in hot, humid, or corrosive environment.Do
not break or crack battery.
Do not store battery when it is fully charged completely drained.
Please shut down the device to save.
Note: The battery should be charged for at least 8 hours before
the first use.
Connecting to PC
After you install the Android driver or an Android smart phone
assistant, you can connect the devices to your PC with USB
cable provided. (You can download the software mentioned
above from http://eu.ute.com. After device connected to your PC,
the screen would display like this:
-
�
Emad
Gall"'Y
0
' ..
--�
CJ
a
Tap the top of the screen,
drag downwards and the
USB setting interface will
appear.
457PM
O
v
o
0
Nlolrc.0:iyllem
IJSBdi!tiu!)Qir'IQCOMHll@d
Tap1ocllsableUS8debugg1n,g
And,o,dSyslem
USBchar�mglhisdevice
Tap fer more options
Click on this to go the next
right interface
Click on this to go the next
left interface
II
N
;t��0706PM
Developer options
On
•
Debugging
USS debugging
Debug mode when USB 1s connected
Revolle USS debugging authOfizations
Bug report shortcut
Show• but1on in the power menu f«
laklngabugrepon
Select mock location app
No mock location app set
Enable view attribute inspection
Select debug app
No debug appllcauon set
To turn on debug mode
•
•
Use use to
Qchargethisdevice
..klslckargelhs�e
0Transferfiles
0
Transfer photos (PTP)
Transferphot�orr1!e1lfMTP1ano1
To transfer pictures
Open the device memory and
removable disk
Open the system storage and removable disk at the same time
in Windows PC----> my computer can view the storage device,
and can transfer and store data
Note: If you want to insert a memory card on your device to use
it as a removable disk, if you do not insert a memory card, you
will not see a removable disk on my computer
Important notice
on lithium ion battery
1 )Charge the battery only with original Unitech power adaptor
supplied in the box
2)Do not store the device with battery installed for long period of
time
3}If long period storage is required, remove battery from device.
4) During long storage period, maintenance work is required at
every 3 months period. During maintenance, discharge the
battery completely, and then charge to 60% - 70% (or 3.8V -
3.9V}.
5) Store battery in dry, cool environment. Temperature should
be -20 to 40 degree Celsius and relative humidity should be
45%10 85%
6) Charge battery at 5 to 45 degree Celsius
7) Do not operate the device outside the recommended
temperature, which is from -20 to 60.
8) Do not install a third party battery into Unitech device
Regulatory Compliance
Statements
Unitech Electronics Co., Lid herewith declares that the unitech
product is in compliance with the essential requirements and all
other provisions of the RED 2014/53/EU directive, the EMC
2014/30/EU directive and the Low Voltage 2014/35/EU directive.
The declaration of conformity is available for download at:
Https://portal.unitech.eu/public/Safetyregulatorystatement
RoHS Statement
This device conforms to RoHS (Restriction Of
Hazardous Substances) European Union regulations
that set maximum concentration limits on hazardous
materials used in electrical and electronic equipment.
Waste electrical and
electronic equipment (WEEE)
unitech has set up a policy and process to meet the EU
directive 2002/96/EC and update 2003/108/EC
concerning electronic waste disposal.
For more detailed information of the electronic waste
disposal of the products you have purchased from
unitech directly or via unitech's resellers, you shall either
Contact your local supplier or visit us at
Https://portal.unitech.eu/public/WEEE
Note: This document is subject to change without prior notice
