30
System <SYS>
There are 4 optons gven n the System menu as shown below – Warm Start, Cold
Start, Update F/W and Update Decoder.
Warm Start
Warm boots the HT580
Cold Start
Reboots the HT580, erasing all data and returning all configurations
to default.
Update Frmware Update firmware. (See page 38)
Update Dec
Unt must be sent n to Untech for ths update.
Another way to Cold/Warm start HT580 by combnaton keys:
COLD START: Whle the unt s OFF. Press and hold the CMD/ALPHA keys and press
the POWER key smultaneously.
WARM START: Whle the unt s OFF. Press and hold the ALPHA key and press the
POWER key smultaneously.
FormCaching
After configuring the Formcaching you can press “2” from the main menu to enter
Formcaching’s data input. Input data will be stored on the HT580 as the file “Form.dat”.
You can use the communcaton tool to upload t back to PC. You can delete t from the
HT580 after t has been successfully uploaded to PC.
1. WARM START
2. COLD START
3. UPDATE F/W
4. UPDATE DEC
Chapter 2
Using the Hardware
