-
9.1.4 Select Card type
Function Description:
This API change the reader working type with different card type and this should be called before
read the card.
Function Call:
INT32 RDINT_WorkingType (BYTE u8COMPort, BYTE u8Type);
Parameter:
u8COMPort:
The reader’s COM port number (1 – 255)
u8Type:
WT_ISO14443_TypeA
WT_ISO14443_TypeB
WT_ISO15693
WT_SR176_SRIX4K
Return code:
Please refer to section 9.5.
9.1.5 Get Reader Information
Function Description:
Get the reader’s serial number and firmware version.
Function Call:
INT32 RDINTv2_ReaderInfo (BYTE u8COMPort, LPBYTE pu8SerialNum, LPBYTE
pu8FirmwareVer);
Parameter:
u8COMPort:
The reader’s COM port number (1 – 255)
pu8SerialNum:
Get reader’s serial number (Length: READER_SERIAL_LEN)
pu8FirmwareVer:
Get reader’s firmware version (Length: FIRMWARE_VER_LEN)
Return code:
Please refer to section 9.5.
9.1.6 Antenna Control
Function Description:
Enable/Disable antenna to save power.
Function Call:
INT32 RDINTv2_AntennaControl (BYTE u8COMPort, BYTE u8Select);
Parameter:
u8COMPort:
The reader’s COM port number (1 – 255)
u8Select: ANTENNA_ON
Open
the
antenna
ANTENNA_OFF Close
the
antenna
AUTO_POWER_LOW Auto turn to low power mode.
POWER_LOW
Manually turn to low power mode.
Return code:
Please refer to section 9.5.
