PROGRESSIVE MICROTECHNOLOGY, INC.
5 of 7
Progressive Microtechnology, Inc.
4425 U.S. 1 South, Ste. 101
St. Augustine, FL 32086
904-797-1050
800.325.7636
fax
904-797-6100
www.evtracker.com
www.barcode-barcode.com
info@evtracker.com
7. Enter the Asset ID Number. You can scan or enter the Asset ID number by using the keypad. If you scan the
Asset ID Number, the program will automatically go to the next entry, otherwise, once you have finished entering
the Asset ID Number, press ENT to continue.
a. If you make a mistake entering the Asset ID
Number, press the “C” button to erase the last character
entry.
b. If you enter the wrong Asset ID Number
, press ENT to continue then Deny the entry by pressing the “3”
button. This will clear the Asset ID Number line and you can re-enter the Asset ID Number.
8.
Accept or Deny the data entry. Once you have entered the information you must press the “1” button to Accept
the data or press the “3” button to Deny the data and re-enter.
a. If you Deny the entry, the Asset ID Number line will clear and you can enter another Asset ID Number.
b.
If you press the “1” button to Accept the data, the program will clear the Asset ID Number line and save
the data to its memory. You will now be able to enter a new Asset ID Number for this Location.
c. If you are ready to enter more data after accepting or denying the current data but need to change the
Loca
tion, press “F2” to change the Location, enter a new Location and then continue scanning your
assets.
9. Once you have scanned all the assets, you can exit from the program by pressing the ESC button and then select
the “1” button for Yes. After you have exited, you can upload the DATAAS.DAT file to your computer and run
your variance reports. When you are finished with this file and ready to perform a new audit, remember to delete
this file from the device.
