-
7.1.4. Disable/enable power button
Function Description:
To enable / disable power button
Function call:
VOID DisablePowerButton (BOOL)
Parameter (Input)
TRUE = Disable power button.
FALSE = Enable power button.
Return code:
None
7.1.5. Set keypad utility input mode
Function Description:
In terminal, there is a utility to emulate full alpha key input, called GetVK. The
input mode can be switched by pressing “alpha” key, or by following function.
Function call:
void SetGetVKWorkingMode(int)
Parameter (input)
For
HT660
:
0 =
normal
1 = lower case.
2 = upper case.
For
PA962/PA966/PA982
0 = hide the selection window.
1 = show lower case selection window.
2 = show upper case selection window.
Return code:
None
7.1.6. Get keypad utility input mode
(For HT660 only)
Function Description:
This function is used to check alpha key input mode.
Function call:
BYTE GetAlphaKeyWorkingMode(void);
Return code:
0 =
normal
.
1 =
lower case
.
2 =
upper case.
7.1.7. Check Alpha key is pressing
(For PA962/PA966/PA982 only)
Function Description:
This function is used to check if alpha key is pressed or not.
Function call:
BOOL GetKeypadAlphaKeyStatus(void);
Return code:
TRUE = Alpha key is pressed.
FALSE = Alpha key is released.