ADVANCED MENU
~
20
~
1) TITLE
You can change the default camera naming here. The default title is the channel number.
Move the cursor to the camera title you want to change, and press ENTER button on the control panel of the DVR to
access the character selection screen. Assign a new name to the camera up to six characters (letters or symbols or
numbers).
2) BRIG / CONT / SATU / HUE
You can adjust the brightness/contrast/saturation/hue of each channel here. The default value of CONT is 098, and
others are 128. The value is adjustable from 0 to 255.
3) COV
Select if you want to mask the selected channel under recording (ON / OFF). When this function is activated, the
wording “COV.” Will be shown on the channel screen.
4) REC
Select if you want to enable recording for the selected channel (ON / OFF). When this function is activated, the
symbol “
” will be shown on the channel screen.
7.1.2 Detection
In this submenu, you can set up detection-related functions.
Move the cursor to “DETECTION”, and press ENTER button. You will see the following screen:
DETECTION
TITLE
DET
AREA
LS
SS
TS
RE
ALARM
CH1
OFF
SETUP
07
03
02
10
OFF
CH2
OFF
SETUP
07
03
02
10
OFF
CH3
OFF
SETUP
07
03
02
10
OFF
CH4
OFF
SETUP
07
03
02
10
OFF
CH5
OFF
SETUP
07
03
02
10
OFF
CH6
OFF
SETUP
07
03
02
10
OFF
CH7
OFF
SETUP
07
03
02
10
OFF
CH8
OFF
SETUP
07
03
02
10
OFF
CH9
OFF
SETUP
07
03
02
10
OFF
CH10
OFF
SETUP
07
03
02
10
OFF
NEXT
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
SELECT
BACK
NEXT
ENTER
The submenu items are described below:
1) TITLE
Show the camera title of each channel set in “CAMERA”.
2) DET
Select if you want to activate the motion detection function for the selected channel (ON/OFF).
3) AREA
There are 16 × 12 grids per camera for all channels. Pink blocks represent the area that is not being detected while
the transparent blocks are the area under detection.
Press ENTER button on the control panel of the DVR to set the detection area. You will see similar screens as the
following:
