ADVANCED MENU
~
24
~
Note:
The PPPOE function needs to have one “username” and one “password” subscribed from one ISP
supplier, and a “DDNS account” to correspond the dynamic IP address to a specific “Hostname”.
For detailed PPPOE settings, please refer to “Network” at page 41. For detailed DDNS settings, please
refer to “DDNS” at page 42.
＜
DHCP
1) NETWORK TYPE
Select the network type as DHCP.
2) DNS (PRIMARY DNS / SECONDARY DNS)
Key in the IP address of the domain name server obtained from your ISP (Internet Service Provider).
3) PORT
The valid number ranges from 1 to 9999. The default value is 80. Typically, the TCP port used by HTTP is 80.
However in some cases, it is better to change this port number for added flexibility or security.
See the example below:
DHCP
NETWORK TYPE
DHCP
IP
000 . 000 . 000 . 000
GATEWAY
000 . 000 . 000 . 000
NETMASK
000 . 000 . 000 . 000
PRIMARY DNS
168 . 095 . 001 . 001
SECONDARY DNS
139 . 175 . 055 . 244
PORT
0080
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
SELECT
BACK
NEXT
ENTER
Note:
This DHCP function needs to be supported by a router or a cable modem network with DHCP services,
and a “DDNS account” to correspond the dynamic IP address to a specific “Hostname”, for this
function to work properly.
For detailed DHCP settings, please refer to “Network” at page 41. For detailed DDNS settings, please
refer to “DDNS” at page 42.
7.1.5 Display
In this menu list, you can set up the settings of display.
Move the cursor to “DISPLAY”, and press ENTER button to enter the submenu. You will see the following screen:
DISPLAY
DE-INTERLACE
ON
QUAD DWELL DURATION (SEC)
03
FULL SCREEN DWELL DURATION (SEC)
03
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
SELECT
BACK
NEXT
ENTER
The submenu items are described below:
1) DE-INTERLACE
Select to enable or disable the de-interlace function (ON / OFF).
Note:
If you set the recording image size as “FRAME”, please TURN ON de-interlace function.
If you set the recording image size as “CIF”, please TURN OFF the de-interlace function.
