52
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co.,Ltd
4.11 PAN Configuration
4.11.1 Auto Mode
Auto Mode Enable *
Auto Mode Disable
When “Auto Mode” function is enabled, and the scanner is working at out of
transmission range, the scanned data will be stored to out-of-range memory.
Memory size is approximately 25,000 sets of EAN13 barcode type. The all stored
data will be transmitted to device when the link is reconnected, and the all data
stored in out-of-range memory will be cleared.
4.11.2 Sleep Mode
Sleep Mode OFF*
Sleep Mode 1 min. ON
Sleep Mode10 min. ON
The scanner is equipped with sleep mode function to save battery energy
when the scanner is not used for 1 minute or 10 minutes. During sleep
mode, all the functions and connection will be halted until pressing the
trigger button. The communication with cradle or Bluetooth device will be
reconnected.
