- 13 -
© 2021 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
MS838B
User’s Manual
B. Long press the button for about 16 seconds
(1) Remove the original receiver.
(2) Long press the button for about 16 seconds. During the process, there will
be 2 sounds respectively; first sound at the 8
th
second, the second at the
16
th
second, then release the button.
Long press 16 seconds to Enter 2.4G pairing Mode
Enable
Disable *
Exit 2.4G Pairing:
(1) When the Receiver is matched, it will prompt once and ending pairing.
(2) Double-click the button to exit and it will prompt once.
(3) If the receiver is not connected within 1 minute, it will exit automatically and
with 3 beeps.
Note
: When exiting the pairing, if the receiver is not connected, it will connect
to the receiver which is matched last time automatically by default.
