Interleaved 2 of 5
Enable/Disable Interleaved 2 of 5
To enable or disable Interleaved 2 of 5, scan the appropriate barcode below, and
select an Interleaved 2 of 5 length.
Set Lengths for Interleaved 2 of 5
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Set lengths for I 2 of 5 to
any length, one or two discrete lengths, or lengths within a specific range. The
range for Interleaved 2 of 5 lengths is 0 - 55.
One Discrete Length
- Select this option to decode only I 2 of 5 symbols
containing a selected length. Select the length using the numeric bar codes in
the Appendix of
Numeric Bar Codes
. For example, to decode only I 2 of 5
symbols with 14 characters, scan
I 2 of 5 – One Discrete Length
, then scan
1
followed by
4
. To correct an error or to change the selection, scan the
Cancel
barcode in Appendix B.
Two Discrete Lengths
- Select this option to decode only I 2 of 5 symbols
containing either of two selected lengths. Select lengths using the numeric bar
codes in the Appendix of
Numeric Bar Codes
. For example, to decode only I 2
of 5 symbols containing either 2 or 14 characters, select
I 2 of 5 – Two
Discrete Lengths
, then scan
0
,
2
,
1
, and then
4
. To correct an error or to
change the selection, scan the
Cancel
barcode in Appendix B.
Length Within Range
- Select this option to decode an I 2 of 5 symbol with a
specific length range. Select lengths using numeric bar codes in the Appendix
of
Numeric Bar Codes
.
For example, to decode I 2 of 5 symbols containing
between 4 and 12 characters, first scan
I 2 of 5 - Length Within Range
. Then
scan
0
,
4
,
1,
and
2
(enter a leading zero for single digit numbers). To correct an
error or change the selection, scan the
Cancel
barcode in Appendix B.
Any Length
- Scan this option to decode I 2 of 5 symbols containing any
number of characters within the decoder’s capability.
NOTE
Due to the construction of the I 2 of 5 symbology, it is possible for a scan line
covering only a portion of the code to transmit as a complete scan, yielding less
data than is encoded in the bar code. To prevent this, select specific lengths (I 2 of 5
- One Discrete Length, Two Discrete Lengths) for I 2 of 5 applications.
54
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Summary of Contents for MS842PG
Page 2: ......
