- 82 -
© 2020 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS851B User’s Manual
3.9.2 Set Lengths for Matrix 2 of 5
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Set lengths for Matrix 2
of 5 to any length, one or two discrete lengths, or lengths within a specific
range.
•
One Discrete Length
- Select this option to decode only Matrix 2 of 5
symbols containing a selected length. Select the
length using the Numeric Bar Codes. For example, to
decode only Matrix 2 of 5 symbols with 14 characters,
scan Matrix 2 of 5 - One Discrete Length, then scan 1
followed by 4. To correct an error or to change the
selection, scan Cancel.
•
Two Discrete Lengths
- Select this option to decode only Matrix 2 of 5
symbols containing either of two selected lengths.
Select lengths using the Numeric Bar Codes. For
example, to decode only Matrix 2 of 5 symbols
containing either 2 or 14 characters, select Matrix 2
of 5 -Two Discrete Lengths, then scan 0, 2, 1, and
then 4. To correct an error or to change the selection,
scan Cancel.
•
Length Within Range
- Select this option to decode a Matrix 2 of 5 symbol
with a specific length range. Select lengths using the
Numeric Bar Codes. For example, to decode Matrix
2 of 5 symbols containing between 4 and 12
characters, first scan Matrix 2 of 5 - Length Within
Range. Then scan 0, 4, 1, and 2 (enter a leading
zero for single digit numbers). To correct an error or
change the selection, scan Cancel.
•
Any Length
- Scan this option to decode Matrix 2 of 5 symbols containing any
number of characters within the decoder’s capability.
