Unitech electronics co., ltd.
Version 1.0
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Tel: + 886 2 89121122
Fax: +886 2 89121810
website: www.ute.com
MS912 Wireless Scanner
Quick Reference Guide
GETTING CONNECTED
There are two modes of wireless communication:
.
E042$
BT Mode – SPP
1. Press the trigger for 1 second to activate the scanner.
2. Scan [
DISCONNECT
]
3. Scan [
BT Mode - SPP
]; the scanner will emit 8 beeps.
4. Select “Wireless Scanner” from discovered device list. The
default pincode is “1234”.
5. Open serial communication software with com port (see Device
Manager) properly set up.
6. The scanner will beep twice to verify the connection.
.E043$
BT Mode – HID
1. Press the trigger for 1 second to activate the scanner.
2. Scan [
DISCONNECT
]
3. Scan [
BT mode - HID
]; the scanner will emit 8 beeps.
4. Select “Wireless Scanner” from discovered device list.
5. The Bluetooth application may prompt you to scan a pincode
(see
PINCODE SETUP
section) it generated.
6. The scanner will beep twice to verify the connection.
.E031$
Disconnect
PINCODE SETUP
Step 1
Pincode Start
.E032$
Step 2
Scan numeric barcodes (see
NUMERIC BARCODES
section on
the next pages) based on the pincode generated by the Bluetooth
application.
Step 3
Enter
$TX
Step 4
Pincode Stop
.E033$
