- 87 -
4.11 Prefix / Suffix
4.11.1 Prefix/Suffix Values
A prefix and/or one or two suffixes can be appended to scan data for use in
data editing. To set these values, scan a four-digit number (i.e. four bar codes)
that corresponds to ASCII values. See the
Table 4-1
and
Numeric Bar Codes
on
Appendix B
.
To change the selection or cancel an incorrect entry, scan
Cancel on
Appendix B
. To set the Prefix/Suffix values via serial commands,
see
Setting Prefixes and Suffixes Via Serial Commands
.
NOTE
In order to use Prefix/Suffix values,
Data Transmission Format
must be set.
