- 88 -
MS926 User’s Manual
4.6.9 No Read
With No Read turned On, the scan engine notifies you if a code cannot be read.
If using an EZConfig-Scanning Tool Scan Data Window, an “NR” appears
when a code cannot be read. If No Read is turned Off, the “NR” will not appear.
Default = Off.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,”
you can edit the output message (
see Data Formatting
). The hex code for
the No Read symbol is 9C.
Off*
On
