- 29 -
© 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS926P User’s Manual
3.3.5.6 EAN-13 Beginning with 414/419 Add-On Code
Required
This setting programs the engine to require an add-on code (2-digit or 5-digit)
on EAN-13 barcodes that begin with a “414” or “419”.
The following settings can be programmed:
Require Add-On Code:
All EAN-13 barcodes that begin with a “414” or “419”
must have a 2-digit or 5-digit add-on code. The
EAN-13 barcode with the add-on code is then
transmitted. If the required add-on code is not found,
the EAN-13 barcode is discarded.
Do Not Require Add-On Code:
If you have selected Require Add-On Code,
and you want to disable this feature, scan Do
Not Require Add-On Code.
EAN-13 barcodes are handled, depending on
your selection for the “Add-On Code
Required” feature.
Do Not Require Add-On Code *
Require Add-On Code
