- 36 -
MS926 User’s Manual
3.3.4.2 Code 93 Append
This function allows the scanner to append the data from several Code 93 bar
codes together before transmitting them to the host computer. When this
function is enabled, the scanner stores those Code 93 bar codes that start with
a space (excluding the start and stop symbols), and does not immediately
transmit the data. The scanner stores the data in the order in which the bar
codes are read, deleting the first space from each. The scanner transmits the
appended data when it reads a Code 93 bar code that starts with a character
other than a space. Default = Off.
Off *
On
3.3.4.3 Code 93 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
bar code being scanned was created using a code page that is different from
the one the host program is expecting. If this is the case, scan the bar code
below, select the code page with which the bar codes were created
2022/ISO 646 Character Replacements
), and scan the value and the Save bar
code from the
. The data characters should then appear
properly.
Code 93 Code Page
