1. Turn on your device by pressing the Power
button
on the front panel.
NOTE:
The PA500II screen ships with a protective plastic film. You may
ble.
The unitec
2.
ill automatically appear when the unit is
reen can
will prompt you to calibrate the unit by tapping a sequence of
3.
he Time zone drop-down menu, and
4.
een instructions to complete the set up. The setup wizard
, you can create an ActiveSync partnership to
e
s.
remove it by peeling from one corner. The screen will be more
susceptible to scratching without the film, but will be more reada
h PA500II welcome screen appears. The Windows Mobile
screen will appear shortly.
Calibrate the PA500II
The calibrate screen w
powered-on for the first time or after the system is reset. This sc
also be accessed at any time by tapping Start
→
Settings
→
System
tab
→
Screen.
The PA500II
screen locations. Tap gently but firmly. When you have completed the
series of taps, press the
Enter
button to confirm it.
Set the Time Zone, Date, and Time
Select your current time zone from t
then tap
Next
.
Follow all onscr
provides tips for using the pop-up menus and assign a lock password to
access your device.
After the device setup
synchronize information between your computer and your device. Se
Establishing Device-PC Connection
in chapter 3 for detailed instruction
8
Copyright 2011 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.