42
Copyright 2009 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Performing a Cold Boot
A cold boot will erase all data and all programs you have added and will restore the
device to the default factory settings. However, data and application programs stored
at the Flash Storage/Flash Disk will be not be deleted.
Never perform a cold boot unless a warm boot does not correct your problem. When
you perform your next ActiveSync operation, you can restore any data that you previ-
ously synchronized to your computer or you can restore data that you backed up to a
storage card.
1. Press and hold the Func key and TAB
key.
2. While holding the Func key and TAB
key, insert the tip of the stylus into the
reset hole on the back of the PA600.
Press and hold the reset button until
you see the unitech splash logo screen.
Wait 5 seconds and then release the
Func key and TAB keys.
NOTE:
When you perform a cold boot, the date and time settings will not be
retained. Formats, preferences, and other settings are restored to their
default factory settings.