Chapter 2
Using the Hardware
19
1. Tap
Start
→
Settings
and select the
Sys-
tem
tab.
Tab the
Scanner
icon.
2. The Scanner Control Panel opens.
In the Scanner Control Panel screen, it is possible to configure bar code scan-
ner parameters such as enabling or disabling bar code symbologies, set data
transmission options, configure magnetic and proximity reading options and set
power management options.
3. To test the bar code scanner, tap the
Test
tab.
4. Tap
Tools
.
5. Tap
Enable Scan
.
6. To perform an auto-scan, Tap
Tools
→
Auto-Scan
→
Start
Auto-Scan
.
7. Choose the time Interval (default: three sec-
onds).
8. Tap:
Start
.
9. The Laser automatically scans bar codes
every three seconds.
10. To stop the auto-scan, tap
Tools
→
Auto-
Scan
→
Stop Auto-Scan
.