21-194
Enter a Name
1.
If you want, in
Name,
edit the name of the device with which you are
creating a bond. You may use any name.
2.
Tap
Finish
.
See Also:
About Bonds
Enter a PIN
Accept a Bond
1.
Make sure that Bluetooth is turned on and in discoverable mode.
2.
When prompted to bond with the other device, tap
Yes
.
3.
In
PIN
, enter a PIN of between 1 and 16 characters, and tap
Next
.
You must enter the same PIN that was entered on the device
requesting the bond.
4.
If you want, in
Name
, edit the name of the device requesting the
bond.
5.
Tap
Finish
.
The bond is created. You can now exchange information with
the other device.
See Also:
Making Your Device Discoverable
About Bonds
Bonding With Other Devices
Beaming Information With Bluetooth
Receiving a Bluetooth Beam