background image

 

 - 

 

USI.DLL – Unitech Scanner Interface DLL 

 

 

2.1  Register the application to the USI DLL 

Function Description: 

Register the application to the USI DLL, so that the DLL can communicate with the application. It 
will also open and initial scanner port (COM2, for example) and set the scanner to the working 
mode. The application should call USI_Unregister to unregister from the DLL after done with the 
scanner. 

 

Function call: 

BOOL

 

USI_Register

(

HWND

 

hwnd

UINT

 

msgID

); 

 

Parameter: (input) 

hwnd:  Handle of the window to which USI DLL will send messages to report all 

activities, including error messages, scan data ready, etc. 

 

msgID

Specifies the message to be posted. DLL will post messages by calling: 
PostMessage(hwnd, msgID, msg, param).

 

 

The window procedure will receive custom message about msgID and wParam parameter 
can be one of the followings: 

 

SM_ERROR_SYS:

 

Indicates a system error, which is caused by a call to the system 
function. Param contains the error code from GetLastEror(). 

 

SM_ERROR 

Indicates an error. Param contains the cause of error, which can 
be on of followings: 

 

SERR_INVALID_HWND

: Invalid 

window 

handle. 

SERR_INVALID_MSGID

msgID cannot be 0. 

SERR_OPEN_SCANNER

Open or initial scanner port failed. 

SERR_CHECKSUM

Checksum error in received packet. 

SERR_DATALOST

New scan data is lost because data 
buffer is not empty. 

SERR_BUFFEROVERFLOW

Data buffer overflow. The default size 
is 4K bytes. 

 

SM_REPLY

 

Indicates received a reply. All the responses from the scanner 
except the scan data will be notified by this message. 

 

SM_DATAREADY

 

Indicates that scan data is successfully decoded and ready to 
retrieve. 

 

SM_ACK

 

Indicates received a ACK. 

 

SM_NAK

 

Indicates received a NAK. 

 

SM_NOREAD

 

Indicates received a No-Read packet. 

 
Note: Scanner port settings are defined in registry as described below: 
 
[HKEY_LOCAL_MACHINE\SOFTWARE\Unitech America Inc.\Scanner\Settings] 
"COMPORT"="COM2:" 
"BAUDRATE"="38400" 
"STOPBITS"="1" 
"PARITY"="None" 

Summary of Contents for PA96 Series










































































































Reviews: