8
Copyright 2011 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Charging the Battery
Before using the terminal for the first time, you need to charge it for about 16
hours. After that, you can charge the terminal for 4 hours to recharge the
battery to full capacity. Charge the terminal using the USB charging cable or
the docking station.
CAUTION!
Operating the terminal for the first time without the AC adapter, and
without fully charging the backup battery may result in loss of data
stored in RAM memory. When the main battery is removed, the
backup battery retains RAM data in memory for 8 hours. Please
charge the battery for the period to avoid data loss in RAM
memory.
NOTE:
Turn the backup battery switch on before charging the battery. Data
you entered may not be properly stored until the built-in backup battery
has been fully charged.
Charging the battery with the cradle
1. Plug the AC adapter cable into the power jack of the cradle (1).
2. Plug the AC adapter cord into an electrical outlet (2).
3. Slide the terminal into the cradle until it clicks into place.
Terminal LED indicators
from left to right:
-- GPRS/Bluetooth
Communication
-- Scan
-- Power
Cradle Power/Communication
LED indicator
Summary of Contents for PA969
Page 12: ......
