Installation
12
2.4 POWERING
PS705 is designed to use a single cable for both data transmission and power
supply. This requires that your host system can provide sufficient power on its
data port (RS232, KBW, or USB).
Power injector
Some applicable PS705 interface cables have a power injector to connect an
external power supply in case the host system cannot supply sufficient power
for the scanner.
+5.2V AC adapter
Power injector
Cable
Power injector
RS232, Keyboard Wedge
√
Powered USB, USB
NOTE
Though some cables have a power injector, this does not
mean that you must use a power supply.
For safety reasons, an automatic switch will disconnect the
power provided by the host system, as soon as a separate
power adapter is connected to the power injector.
Changeable power plugs
To change the power plug suited to your area, follow the steps below:
1. Press and hold the tab on the AC power adapter.
2. Remove the changeable plug outwards.
3. Replace with the desired power plug.
Summary of Contents for PS705
