PT630
Operation
Guide
Page
36
of
41
5.2.4 Uploading files from PT630 to HOST using the Kermit Server
Having collected the data into the PT630, the user can upload one or more collected data forms
to your PC.
On PT630:
•
Connect the RS-232 port of PT630 to the COM port of your PC with a null modem cable.
•
Press
[
⊙
]
key to power up the PT630.
•
Check the PT630 protocol and communication parameter settings.
•
Press and hold down [CMD] key for 2 seconds to enter User mode, then select “3.COM” in
User mode to enter Kermit server mode. (see On HOST to process file download from Host
side)
On HOST:
•
Run KERMIT.EXE program on PC. The program is in the PT630 Communication Utility
Diskette.
•
First, set communication parameters to match the portable’s. then invoke upload command
by entering “GET filename”.
•
Enter [Q] to return to DOS.
