R16 - Installation and Programming Manual
24
The R16 will accept up to 14
8QLWHFK
Radio Keys to be used for remote
control wireless Arming/Disarming and Panic functions.
Radio Keys are programmed to one of the 15 User Code slots with
the easy to use radio ‘Learn’ mode. A User Code slot can be either
a keypad code or a radio key code, not both. User Code 1 is always
a keypad code.
PROGRAMMING SEQUENCE
1. Press:
P10E
• The RADIO icon will turn on and zone numbers 2-15 will show which
user code slots have radio devices programmed.
2. Press:
[user number 2–15] E
• The selected user number is flashing. The user slot is in learn mode.
• A long beep means the Radio Key may already be programmed to
another user slot.
3. Press the required Radio Key button to send the “Learn”
message. (See “How To Send The Learn Message”).
• Three beeps indicates the radio key has been successfully
programmed.
EXAMPLE
To program a Radio Key to user slot 2:
Press
P10E 2E
then press and hold the PANIC button on the Radio Key.
TO DELETE A RADIO KEY
To delete an existing Radio Key, press P10E, select the user
number to delete [2E–15E], then press P10E again.
EXAMPLE. To delete the Radio Key on user slot 2:
Press:
P10E 2E P10E
PROGRAM MODE LEVEL:
User, Installer, Remote by PC.
FACTORY DEFAULT:
No radio keys programmed.
NOTES:
RELATED OPTIONS:
• P11E-P25E, Program user
codes.
• Extra Options For Radio
Codes, page 25.
P10E
PROGRAM RADIO KEYS
PROGRAMMING
HOW TO
SEND THE
LEARN
MESSAGE:
RK4 RADIO KEY
Press and hold Panic
for 8 seconds.
RDB RADIO
DOORBELL*
Press and hold for
8 seconds.
RKP RADIO
KEYPAD
Insert the battery or
consult the Radio
Keypad manual.
* If the optional Radio Doorbell is available in your region.
