Chapter 2
Using the Hardware
17
Using the Stylus
CAUTION!
Never use anything other than the RH767 stylus on the screen. Otherwise this
could cause a permanent damage.
1. Remove the stylus from its holder.
2. Hold the stylus as you would a pencil.
3. To make a choice from a menu, lightly
tap the tip of the stylus on that choice.
4. To write data into a field on a form,
use the stylus to print the letters or
numbers. Use very light pressure.
Using the Laser Scanner
The RH767 has an integrated laser scanner which reads all major bar code labels with
excellent performance.
NOTE:
Reading software must be enabled in order to operate the scanner. This can be a
userloaded application or a pre-loaded utility such as Scanner Setting.
Activate the laser scanner by pressing either
one of the trigger keys located on the left and
right side of the unit.
The RH767 has a built-in Scanner Setting
utility that allows you to test the device’s
barcode scan function.
1. To launch Scanner Settings, press
[FUNC] + [7].
NOTE:
Alternatively, tap
Start → Settings →
System →Scanner Settings
.
Esc
alpha
Func
Enter
a
b
c
d
e
f
g
h
m
r
q
i
j
n
o
k
p
Del
t
x
y
z
BkSp
u
v
w
l
s
1
2
3
4
5
6
7
8
9
0
@
%
“
<
,
/
.
.
-
+
=
(
[
[
Scan button
