30
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Encryption:
1.
To setup the encryption, scroll down the encryption list
and select the encryption type in your network.
2. Tap "WEP keys/PSK's"
3. Enter the WEP keys and tap "OK".
Commit and Activate
1.
Tap "Commit" to activate the setting.
2.
In "Main" tab, select the profile you want to activate.
3.
In "Status" tab, you can see the IP address and the
signal strength.