-
7
-
-
8
-
SHUT DOWN
METHOD 1:
By default, the unit shuts down automatically after 5 minutes of
inactivity.
METHOD 2:
Using a needle or paper clip, press the Reset Button located at
the bottom of the reader once. This will force a shut down.
METHOD 3:
Simply disconnect the battery from the reader. This will force
a shut down as well.
POWER UP
Press the Trigger Button for 2 seconds. The unit will emit one (1)
long beep and light the LED red as confirmation that the reader
has successfully powered up.
DISCONNECT/ CLEAR PAIRING RECORD
STEP 1:
Remove/Forget the the “UHF RFID reader” from the Bluetooth
device list on your host device.
STEP 2:
Long press on the Function Button for 5 seconds without releasing.
The unit will emit three (3) beeps and the blue LED will start flashing
as confirmation that the reader is discoverable.
Trigger Button
Function Button
Reset Button
