RP901 User Manual
3.2 Scan Operation and Delay Time
Sets the Scan Operation and the Delay Time between tags scan.
3.2.1 Scan Operation
In Trigger Mode, if the Trigger button is pressed and
no successful tag scan is completed within the Scan
Operation, the Scan Operation terminates. This
feature may be disabled by setting Scan Operation to
0 (Disabled).
Configuration Method: Select a value (0~255
seconds) then click
to send the new
parameter value to the RP901.
Default Setting: Disable
3.2.2 Delay Time
Sets the Delay Time between every tag scan.
This feature may be disabled by setting Delay
Time to 0 (Disabled).
Configuration Method:
Select a value (0 ~ 1500ms) then click
to transfer the new parameter value to the
RP901.
Default Setting: Disable
33
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co.,Ltd
