TB160 User’s Manual
1.4.6 Using the Stylus
Following the information below when using a stylus:
■
Use only the included stylus to touch the screen. Do not place any objects
on its surface and do not press down strongly with sharp-pointed or hard
objects that may leave marks (e.g., nails, pencils and ball point pens).
■
Use the stylus only for touching the screen. Using it for any other purpose
may damage the stylus and result in scratches on the screen.
■
The pointer cannot follow the stylus movement if you move the stylus too
quickly.
To make a selection, tap the screen once with the stylus. To double-click, tap
twice without pausing. To do a right-click, tap the screen once and hold the tip
of the stylus on the screen, the right-click icon appears.
1.4.7 Removing the Protective Film from the
Display
The front display of the TB160 is protected during transport by a transparent
film. This film should remain on the front display during assembly to avoid
damage to the front display surface.
Only remove the film once all of the assembly work has been completed.
19
© 2017 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.