TB160 User’s Manual
■
Step 2: Enable Legacy Boot
1. Access the BIOS Setup Utility, see “
Accessing the BIOS Setup Utility
”
2. Navigate to
APP Menu > Main > Boot Features
.
3. Locate the
Legacy Boot
setting and tap on the menu to select On enable
legacy boot.
■
Step 3: Enable USB 2.0 Support
1. Access the BIOS Setup Utility, see “
Accessing the BIOS Setup Utility
”
2. Navigate to
APP Menu >Advanced > Miscellaneous Configuration.
3. Locate the
USB Controller Select
drop-down menu and tap on it.
4. Tap
USB 2.0
from the menu list. USB 2.0 is now enabled for the device.
■
Step 4: Advanced > Miscellaneous Configuration
■
Save the Settings
42
© 2017 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.