Unitech UNI-335, Operation Manual

14

3. The engine will run until the pre-programmed time elapsed or shutdown input is 

received. 

D. TURBO CHARGE MODE: 

Turbo charger mode keeps the engine running after arriving at you r destination for a 

programmable period of 1, 3 or 5 minutes, This allows the vehicle’s engine time to 

conveniently cool down the turbo after you have left the vehicle. 

To activate: 

1. While the engine is running, pull up the hand brake and place the transmission gear in 

the park position. 

2. Before turning off the engine, press and release 

and

buttons at the same time.   

-- The LED will flash indicating the remote start has entered the turbo charger mode 

appear on LCD remote . 

3. Take the “Ignition Key” from the key cylinder. 

-- Engine keeps running. -- 

4. Exit and secure the vehicle. 

-- Engine continues running until the pre-programmed time elapsed. -- 

NOTE: This feature only applies to vehicles with Turbo Charged Engines. 

E. TIMER START: 

This unit can be programmed to start and run the engine every 3 hours or punctually at 

the same time next morning, the engine will run for the programmed running time and 

then shut down. 

IMPORTANT: Timer Start should be used only in open areas, never start and run 

the vehicle in on enclosed space as a garage or carport. 

Daily Timer Start: 

The feature is very useful for the driver who wants to run the vehicle 

punctually at the same time next morning. Before set-up of the “Daily Timer Start”, you 

should set you time for engine start.( see Timer Setting / Timer set-up for “Daily Timer 

Start, in Advanced users Mode) 

ENTER: 

A 

3 Hours Timer Start

: 

 1. Press the

button once to remote start the vehicle. As soon as the vehicle is running 

and the parking lights flash one time. 

2. Immediately depress the

button once, within 2 seconds 

The parking light will flash (1) times /

icon appear. The siren or horn chirps (1) times. 

The vehicle is now programmed to start every 3 hours. 

B: 

Daily Timer Start: 

Follow programmed Daily Start Timer on LCD remote in Advanced 

user mode.Press 

button of LCD remote transceiver to activate or cancel Daily Start