EN
18
Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions
carefully and thoroughly before using the product.
UNISOLAR 10.24 / 20.24 / 30.24
Unisolar is a solar charge controller for autonomous photovoltaic system.
Through its integrated microprocessor, Unisolar regulates the charging current coming from the panel
towards the battery depending on:
- the ambient temperature (temperature sensor integrated)
- the charge level of the battery (ALGOTECK load curve)
- the battery
’s
technology (Gel/Liquid/AGM)
With its PWM technology, it ensures an optimal charge quality of 12V or 24V batteries. It extends their
lifespan and optimizes the output of your solar installation.
Unisolar perfectly recharges any lead-acid batteries up to 100%:
- Liquid electrolyte
- Gel-cell (GEL)
- AGM (maintenance free)
Moreover, Unisolar incorporates a 12/24V controlled output to help avoid deep discharges of your battery and
preserving their lifespan.
INSTALLATION - FIXING
Unisolar has been designed for an indoor use.
It incorporates an external temperature sensor which adjusts the load voltage according to the ambient
temperature for an optimal charge of your battery (see protection part for more details). Installing it near
the battery is recommended.
The solar charge controller can be fixed:
-
On a solid, stable and dry appropriate flat surface, with 4 screws (not provided)
-
Or on a DIN rail: 35mm with its specific bracket (except Unisolar 10.24).
For a complete integration of your solar charge controller in your environment, Unisolar 10.24, 20.24 and
30.24 give you the possibility to pass the wiring through a partition wall.
