UniPan-3XXX Series User Manual
38
JP5:
(2.0mm Pitch 2x3 Pin Header), COM5 setting jumper, pin 1~6 are used to select
signal out of pin 9 of COM5 port.
JP6 Pin#
Function
Close 1-2
RI (Ring Indicator) (default)
Close 3-4
COM5 Pin9=+5V (option)
Close 5-6
COM5 Pin9=+12V (option)
COM5(SBC-710/COM3):
(Type DB9), serial port, standard DB9 serial port is provided to make a direct
connection to serial devices. COM5 port is controlled by pins No.1~6 of JP5,
select output Signal RI or 5V or 12v, For details, please refer to description of
JP3.
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP5 Setting:
Pin1-2: RI (Ring Indicator) (default)
Pin3-4: 5V Standby power (option)
Pin5-6: 12V Standby power (option)
COM6(SBC-710/COM3)
：
(Type DB9), serial port, standard DB9 serial port is provided to make a direct
connection to serial devices. COM6 port is controlled by pins No.1~6 of JP6,
select output Signal RI or 5V or 12v, For details, please refer to description of
JP6.
Summary of Contents for UniPan-3150
Page 9: ...UniPan 3XXX Series User Manual 8 Figure 1 5 Dimensions of UniPan 3215...
Page 17: ...UniPan 3XXX Series User Manual 16 units mm Figure 2 1 Mainboard Dimensions...
Page 81: ...UniPan 3XXX Series User Manual 80 Step 2 Select Resistive Touch Step 3 Click Next to continue...
Page 106: ...UniPan 3XXX Series User Manual 105 Hardware Saturn Hardware Configuration...
