GB
│
IE
│
7
■
ULG 350 B1
Preparing for hot lamination
♦
Insert the plug of the laminator into a mains power socket .
♦
Switch the appliance on by pushing the On/Off switch
5
to the “
ON
” posi-
tion . The red
Power
indicator light
2
lights up .
♦
Set the selector switch for hot and cold lamination
6
to “
HOT
” .
♦
Place the pouch thickness switch
4
at the corresponding pouch thickness
(see also chapter
Switching levels
) .
NOTICE
►
The attainment of the operating temperature is indicated by the glowing
of the green indicator light
Ready
3
. For a more uniform laminating result
we recommend, especially for thinner foils (below 125 Micron), and after
adjustment to a different foil thickness, to first wait an additional 2-3 minutes
before beginning with lamination .
♦
Place the document to be laminated into a laminating pouch of the
appropriate size .
NOTICE
►
Ensure that all edges of the document have at least two millimetres of
space to the edges of the laminating pouch, as shown in Fig . 1 .
►
Make certain that you use only one pouch for laminating . First flip it up, as
shown in Fig . 2 .
►
For further information about the lamination process, please read the
section
Lamination process
.
Fig . 1
Fig . 2
Summary of Contents for 366662 2101
Page 3: ...1 2 3 5 6 7 4 ...
