GB
│
IE
│
9
■
ULG 350 B1
Lamination process
♦
Place the pouch centrally on the small supporting surface at the pouch slot
1
.
If the size permits, the pouch should be placed with the closed side towards
the pouch slot
1
.
♦
Slide the pouch slowly and straightly into the pouch slot
1
.
♦
When you have slid the pouch several centimetres into the slot
1
it will then
be pulled in automatically . Release the laminating pouch as soon as you
notice it being pulled in automatically .
IMPORTANT
►
Ensure there is at least 30 cm of open space in front of the laminator . Oth-
erwise, the pouch will not be ejected completely from the laminator after
lamination . This could damage the pouch .
♦
The finished and laminated pouch is ejected from the pouch ejector slot
7
of the laminator .
NOTICE
►
Only after hot lamination:
When the finished laminated pouch is
ejected from the pouch ejector slot
7
of the laminator, it is hot and can
easily change its shape . For this reason, let the laminated pouch cool for
one minute before touching it .
►
To improve the lamination result, you can weigh a still hot laminated pouch
down with a book, a file folder or any other heavy, flat object . This will
give it a smooth and flawless surface .
♦
If you do not wish to start another laminating procedure, move the On/Off
switch
5
to “
OFF
“ and rotate the pouch thickness switch
4
to the
ABS
position .
♦
Disconnect the plug from the mains power socket .
Anti-blocking function
At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance .
♦
Turn the anti-blocking switch
4
to the position
ABS
. The pouch will no longer
be drawn in .
♦
Remove the pouch and turn the anti-blocking switch
4
back to the desired
pouch thickness .
♦
Re-start the lamination process .
Summary of Contents for 366662 2101
Page 3: ...1 2 3 5 6 7 4 ...
