6
10
9
8
7
6
5
4
3
2
1
Important safety
information
Exemption From Liability
Intended use
Overview
Features
Guillotine
Read this manual thoroughly, observing
1.
the instructions and information in it
when operating the machine.
Keep this operating manual in a safe
2.
place for future reference.
Before starting to use the device, set it
3.
down on a level, stable working base.
Never take hold of the knife blades when
4.
carrying the device or putting it away.
Use both hands to operate the device.
5.
Keep loose clothing, ties, jewellery, long
6.
hair and other loose objects away from
the cutting unit.
Risk of injury!
The device has been exclusively
7.
designed to cut paper.
Before cutting, remove any staples or
8.
paper clips from the document.
The blades must be neither greased nor
9.
ground.
The device must not be used if a blade or
10.
the housing of a blade is damaged.
The device must not be used if the knife
11.
protection is not installed properly.
Be careful not to cut your fingers when
12.
replacing blades. Avoid contact with the
cutting blades at all times.
Keep the device out of the reach of
13.
children.
Children and minors may only use the
14.
device under the supervision of an adult.
The device is not intended to cut
15.
fingernails.
We cannot guarantee that the information
which relates to the technical properties of
the product or to the product itself contained
in this document is correct. The product
and, where applicable, its accessories,
described in this document are subject to
constant improvement and further
Please observe the following
information to ensure reliable
operation of the cutting unit:
For cutting photos, card, printouts or
laminated paper perfectly to size
Guil pressing rail with finger
protection
Trimmer with 3 types of cut
(straight cut, perforation and wave cut)
Visual positioning aids in cm (lines,
angles,
scale)
Rubber footpads for secure, non-slip
base
Dimensions: 453 x 215 x 64 mm mm
(L x W x H)
Weight: 1.37 kg
Cutting length guillotine: 318 mm
Cutting length trimmer: 320 mm
This cutting unit may only be used to cut
paper, card, photo paper and laminating foil.
Any other use is considered unintended use.
Unauthorised modifications or
reconstructions are not permitted.
Rubber footpads
Selector knob
Setting lock
Guillotine arm
Guide rail
Locking latch
Pressing rail with finger protection
Blade
End cap
Pressure paper knob
development. For this reason, we reserve
the right to modify components,
accessories, technical specifications and
related documentation of the product
described herein at any time without notice.
Cutting capacity: max. 10 sheets
(80 g / m²)
Pressing rail with finger protection
Cutting blade made of stainless steel
GB
71864_uof_2in1_papierschneidegeraet_content_lb4.indd 6
27.09.2011 08:40:21
