ULG 300 B1
GB
│
IE
│
25
■
Preparing for cold lamination
CAUTION
►
After hot laminating, allow the laminator to cool down completely before
beginning with cold lamination . Bear in mind, the rollers inside the lamina-
tor will still be hot . This could damage the laminating pouch and the docu-
ment to be laminated!
♦
Place the pouch guide rail
1
into the holes designed for this purpose on the
rear of the laminator .
♦
Pull out the document supports
q
so that the documents are pulled into the
slot for manual pouch insertion
5
straight .
♦
Insert the plug of the laminator into a mains power socket .
♦
Set the ON/OFF switch
7
to “ON” (I) .
♦
Set the selector switch for hot and cold lamination
8
to “COLD” (O) .
NOTE
►
Note: for cold laminating, always set the pouch thickness switch
e
to
125 µm . The red ON/OFF indicator lamp
9
and the green indicator lamp
"Ready"
6
light up .
♦
Place the document to be laminated into a laminating pouch of the appropri-
ate size .
NOTE
►
Ensure that all edges of the document have at least two millimetres of space
to the edges of the laminating pouch, as shown in Fig . 1 .
►
Make certain that you use only one pouch for laminating . First flip it up, as
shown in Fig . 2 .
►
For further information about the lamination process, please read the section
Lamination process
.
IB_297529_ULG300B1_LB8.indb 25
22.11.17 13:48
Summary of Contents for IAN 297529
