UNITED OFFICE KH 4419, Operating Instructions Manual

- 4 -

3. Insert the plug into a mains power socket .
4. Switch the appliance on by pressing the ON /

OFF switch 

4

. The red control lamp 

7

glows.

• As soon as the green control lamp 

6

glows the appliance has reached its operating
temperature. Additionally, an acoustic signal
sounds.

5. Select a suitable thermal binder cover for your

document:

6. Tap the sides of the sheaf of papers a few times

to ensure that ALL of the sheets are lying exactly
above each other.

7. Lay the sheets into a suitable thermal binder cover

and then tap them down a couple of times, against
and using the cover spine. 

8. Slide the complete thermal binder brochure into

the binder shaft 

1

until the spine of the brochure

makes firm contact with the hotplate on the floor
of the thermal shaft 

1

.

9. Press the START 

5

button. The control lamp 

7

glows, the control lamp 

6

blinks.

10.As soon as an acoustic signal sounds and the

control lamp 

6

glows constantly you can

remove the thermally bound brochure from the
binding shaft 

1

. Place it in the document holder

2

so that the adhesive can harden. The binding

is sufficiently hardened after approx. 60 seconds.

Number 

of sheets

80g/m

2

Brochure 

thickness in mm 

20

2 mm

30

3 mm

60

6 mm

11. After use, place the ON/OFF switch 

4

at O

and remove the plug from the mains power 
socket.

Note: 

Depending on the thickness of document, it is possible
that the binding process must be repeated several 
times. For documents with a binding spine of 20 mm
or more (200 sheets), you must repeat the binding
procedure approx. 5 times. 

Cleaning and care

Risk of potentially fatal electrical
shock:

• Always remove the plug from the mains power

socket before you clean the appliance!

• Never open the housing of the appliance. 

There are no user-serviceable elements inside. 

• Never submerse the appliance into water or 

other liquids! 

Allow the appliance to cool down completely.

Clean the surface of the housing with a slightly
damp wash cloth.

Ensure that moisture c

IB_KH4419_46684_LB3B  01.03.2010  11:41 Uhr  Seite 4