UAV 190 B2
GB│MT
│
37
■
Cleaning
DANGER – ELECTRIC SHOCK!
►
Always pull out the plug before cleaning the appliance . There is a risk of
electric shock!
WARNING – RISK OF INJURY!
►
The cutters in the appliance are very sharp! Risk of injury!
CAUTION! MATERIAL DAMAGE!
Do not spray any oil or other lubricants into the cutter opening
2
.
These can irreparably damage the appliance .
●
Remove any residue left in the cutting opening
2
or cutting blades with a
suitable tool, e .g . a pair of tweezers . Ensure that the appliance is unplugged
before doing this!
●
Clean the appliance with a moist cloth . For stubborn dirt, add a little mild
detergent to the cloth .
Faults
If the paper jams:
This means that you have attempted to feed too much paper into the appliance
(max . 6 sheets 80 g /m
2
paper) .
●
Move the switch
1
into the “REV” position if the paper causes a blockage .
The appliance now goes into reverse and the material that is being shredded
is ejected .
●
Pull the paper out of the appliance and then set the switch
1
to “AUTO” .
●
The appliance is now ready for use .
If the appliance suddenly stops working:
This means that the appliance is overheated and the automatic safety cut-out has
activated itself . The overheat LED
5
lights up red .
WARNING – RISK OF INJURY!
►
Remove the power plug from the wall socket to avoid unintended restarting
of the appliance .
●
Place the switch
1
in the “OFF” position .
●
Empty the container .
●
Allow the appliance to cool until it has cooled to room temperature .
●
Put the mains plug back into the socket .
●
Switch the appliance on by moving the switch
1
into the “AUTO” position .
Summary of Contents for UAV 190 B2
Page 3: ......
