ULG 300 B1
■
22
│
GB
│
IE
Setting up
For the safe and trouble-free operation of the device, the set-up location must
fulfil the following requirements:
■
Place the appliance on a firm, flat and level surface .
■
Set up the appliance so that there is enough free space in front of the laminator
to allow the pouch to come completely out of the laminator .
■
Do not operate the device in a hot, wet or extremely damp environment or
near flammable materials .
■
The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency .
Handling and use
In this chapter you will receive important information on the handling and opera-
tion of the appliance .
Suitable laminating pouches
For hot lamination, you can use pouches with a width of up to 320 mm and a
maximum thickness of 125 µm . Please note that each laminating pouch may only
be used once .
NOTE
►
For hot lamination, use only laminating pouches that are expressly intended
for hot lamination .
►
For cold lamination, use only laminating pouches that are expressly
intended for cold lamination .
►
Take note that the laminating pouches supplied with the laminator are
intended exclusively for hot lamination .
IB_297529_ULG300B1_LB8.indb 22
22.11.17 13:48
Summary of Contents for ULG 300 B1
