18
MAINTENANCE
"/2(1"'(
a.
"
– When any wood is burned slowly, it produces tar and other organic vapors, which combine with
K Y
+ # Y
K 9
pellet stoves can accumulate creosote under certain conditions.
b.
),
+ Y
Y KY Y A
such as occurs during startup, shutdown, or incorrect operation of the room heater will lead to some soot formation which
will collect in the exhaust venting system. The exhaust venting system should be inspected at least once every year or
ton of pellets burned to determine if cleaning is necessary.
c.
,
– The chimney connector and chimney should be inspected annually or per ton to determine
Y+ A
A 6
Z
#Z
sweep can perform this service. It is also recommended that before each heating season the entire system be professionally
inspected, cleaned and, if necessary, repaired.
To clean the chimney, detach the vent at the combustion blower transition where it is attached to the blower.
("-22(3(32.("()"/(39'(
Use this as a guide under average-use conditions.
Gasket around door and door glass should be inspected and repaired or replaced when necessary.
(See
[(&'"(2(.&.)\
)
(2-D'3(&'"(2(.->-6(3-- '))
While wearing leather gloves (or any other gloves suitable for handling broken glass), carefully remove any loose pieces of
glass from the doorframe. Dispose of all broken glass properly. Return the damaged door to your US Stove Dealer for repair
or replacement.
E G >@ # G
dealer must perform all repairs involving door glass.
Daily
Weekly
Annually or per Ton
Burn Pot
Stirred
Emptied
Glass
Wiped
Cleaned
Combustion Chamber
Brushed
Ashes
Emptied
Interior Chambers
Vacuumed
Heat Exchange Tubes
Two passes
Combustion Blower Blades
Vacuumed / Brushed
Convection Blower Impeller
Vacuumed / Brushed
Vent System
Cleaned
Gaskets
Inspected
Hopper (end of season)
Emptied and vacuumed
All manuals and user guides at all-guides.com
