background image

 7

11.  Bolt the top panel (1) to the side panels (2 and 14) so 

the top surfaces are flush to one another using items 

3 and 4.

12.  Assemble the trim frame. The trim consists of a left (6) 

and right (5) side piece and a split top piece (left #8, 

right #7). These are joined by corner connectors (11-

13) and two straight center connectors (9-10). These 

slide into the channel on the back of the frame and 

are secured with two set screws (13) in each piece.

ASSEMBLY INSTRUCTIONS 

13.  The trim slides over the surround assembly and is se-

cured at the base of each side with a machine screw.

14. The Surround Assembly is then slid over the appli-

ance. Slots in the two side panels accommodate the 

hood at the top of the appliance (figure 6).

15. The surround assembly is held in place with two 

springs at the top of either corner of the appliance 

(figure 6).

16. Connect power cord of blower to grounded receptacle.
17. Firebrick extends the life of your stove and radiates 

heat more evenly. If firebricks were removed to posi

-

tion appliance, replace them before firing appliance. 

See  figure  7  for  proper  orientation  and  positioning. 

Install the back row first, then sides and finally install 

bottom firebricks.

CAUTION: RISK OF FIRE!

•  REPLACE FIREBRICKS BEFORE FIRING WOOD

-

STOVE. POSITION FIREBRICKS SO NO GAPS 

REMAIN BETWEEN BRICKS.

•  NEVER OPERATE THIS APPLIANCE WITH MISS

-

ING OR CRACKED FIREBRICK.

•  KEEP  FURNISHINGS  AND  OTHER  COMBUSTI

-

BLE MATERIALS AWAY FROM THE STOVE AND 

OUTSIDE MINIMUM CLEARANCES.

1

14

2

6

5

7

8

3

4

9

10

11

12

13

SURROUND ASSEMBLY

VIEW FROM BACK

SPRING

SURROUND

Slots in surround

slide of firebox top

Figure 6. Surround Installation

A

A A

A A

B B

B

B B

B

A A

A A

D

C

C

E

Firebrick Dimensions: (inches)

A

4.50” x 9.00”

B

3.33” x 9.00”

C

3.38” x 9.00”

D

2.25” x 9.00”

E

1.25” x 2.25”

Note: All Firebrick is 1.25” Thick

Figure 7a -

Back Firebrick Arrangement

Five (5) A-Size

Figure 7b -

Side Firebrick Arrangement

Six (6) B-Size

Figure 7c -

Bottom Firebrick Arrangement

Four (4) A-Size

Two (2) C-Size

One (1) D-Size

One (1) E-Size

Summary of Contents for Country Hearth 2200IE





















Reviews: