-2-
CAUTIONS:
•
Hot while in operation. Keep children, clothing and furniture away. Contact may cause skin burns.
•
Do not use chemicals or fluids to ignite the fire.
•
Do not leave the stove unattended when the door is slightly opened.
•
Do not burn garbage, flammable fluid such as gasoline, naphtha or motor oil.
•
Do not connect to any air distribution duct or system.
•
Always close the door after the ignition.
Combustible:
Wood
Colors:
Metallic Black
Flue Pipe Diameter:
6” (153 mm)
Flue Pipe Type: (Standard Single Wall or Double
Wall):
Black or Blued Steel 2100°F (650°C)
Minimum Chimney Height:
12’ (3.7 m)
Maximum Log Length:
21” (534 mm)
Dimensions
Overall: Depth x Width x Height:
21.5” x 32” x 33.5” (547 mm x 813 mm x 864 mm)
Combustion Chamber: Width x Depth:
11-3/8” x 24-3/4” (289 mm x 629 mm)
Volume: Cubic Feet:
2.32 ft³
Door Opening: Width x Height:
10” x 11-3/8” (854 mm x 289 mm)
Note: Register your product on line at www.usstove.com. Save your receipt with your records for any claims.
The instructions pertaining to the installation of your wood stove comply with UL-1482 (R2015) and ULC-S627-00
(R2016) standards. This manual describes the installation and operation of the USSC, US2941EB wood heater. This
heater meets the 2020 U.S. Environmental Protection Agency’s cordwood emission limits for wood heaters sold
after May 15, 2020. Under specific test conditions, this heater has been shown to deliver heat at rates ranging from
17,611 to 48,127 Btu/hr (0.91g/hr and efficiency of 72%). Note: The BTU ratings mentioned above are based on the
EPA test protocol under specific test conditions. Our advertised BTU’s are based on the first hour of operation at
high burn rate burning cordwood.
