Chapter 13: Alarm and event setup
TruVision DVR 45HD User Manual
107
TVRMobile push notifications
TVRMobile 2.3 (and higher) can receive events from the recorder.
The ‘Push notifications’ feature lets TVRmobile notify a user of new messages or
events even when the user is not actively using TVRMobile.
In TVRMobile, events can be received from the recorder and these events can be
shown as a push notification to the user.
The recorder needs to be connected to the internet to be able to use push notifications.
Even when the phone or tablet is used via Wi-Fi on the same LAN as the recorder, an
internet connection is required.
Recorders supporting push notifications
TVN 10 (FW 2.1)
TVN 21 (FW 3.1)
TVN 22 (FW 1.0)
TVR 12HD (FW 1.2)
TVR 44HD (FW 1.2)
TVR 45HD (FW 1.0)
Set up push notifications
To set up push notifications in the recorder
1. In the browser or OSD, set up an event for the desired camera.
2. In the
Actions
tab, enable
Notify Alarm Host
.
3. Under
Alarm & Event Setup
>
Alarm Host Setup
leave the destination address
empty.
4. Go to
Network Settings
>
Network Settings
.
5. Enter the DNS, IPv4 Default Gateway settings. Also enter the HHTP port, RTSP
service port and Server port settings.
HTTP port (default: 80) (*)
RTSP port (default: 554) (*)
Server port (default: 8000)
(*) Some ISPs block the use of port 80 and/or 554. When these ports are blocked,
use a port number higher than 1024.
To set up push notifications for TVRMobile:
1. In TVRMobile, add the recorder.
2. Enter the DNS and Default Gateway settings.
