Chapter 16: User management
126
TruVision DVR 45HD User Manual
Customize a user’s access privileges
Only an administrator can allocate access privileges to Operator and Guest users. The
access privileges can be customized for each user’s needs. The administrator’s access
privileges cannot be changed.
There are three types of privilege settings: Local Configuration, Remote Configuration,
and Camera Configuration.
Note
: Only the administrator can restore factory default settings.
Local configuration settings
By default, only the local information (log) management setting is enabled for both
operators and guests.
• Local Information (Log) Management:
Search and view logs of the recorder and
view system information.
• Local Parameter Settings:
Configure parameters and import the configuration from
the recorder.
• Local Camera Management:
Locally add, delete, and edit IP cameras.
• Local Advanced Operation:
Access HDD management (including the initialization
and modification of disk properties). Update system firmware as well as stop the I/O
alarm output.
• Local Shutdown/Reboot:
Shutdown or reboot the recorder.
Remote configuration settings
By default, only remote log search and two-way audio are enabled for operators, and
only the remote log search is enabled for guests.
• Remote Log Search:
Remotely view logs that are saved on the recorder.
• Remote Parameter Settings:
Remotely configure parameters and import
configuration.
• Remote Camera Management:
Remotely enable and disable channels.
•
Remote Serial Port Control:
Remotely configure the RS-232 port.
• Remote Video Output Control:
For future use.
• Two-Way Audio:
Use two-way audio between the remote client and the recorder.
• Remote Alarm Control:
Remotely alert or control the relay output of the recorder.
Alarm and notification settings must be configured properly to upload to host.
