Chapter 18: Using the web browser
TruVision DVR 45HD User Manual
143
Figure 33: Remote browser configuration window (Recording Schedule window shown)
Table 17: Description of remote configuration menus
Menu
Function
Description
Camera Setup
Analog Camera
Overview
Define the analog cameras. See “Configure the signal input
channel” on page 62 for further information.
IP Camera Status
Define the IP cameras. See “IP camera status” on page 63
for further information
IPC Import/Export
Import and export the IP camera configuration information.
See “Import/export IP camera files” on page 66 for further
information.
Camera Recording
Settings
Define the general camera settings such as camera name,
stream record mode, resolution, frame rate, audio recording,
and pre and post event times. See “Camera recording
settings” on page 66 for more information.
Snapshots
Define the image quality of snapshots. See “Snapshots” on
page 68 for further information.
Camera OSD
Define which information is displayed on-screen. Only
applied for analog cameras. See “Camera OSD” on page 69
for further information.
Motion Detection
Define motion detection parameters. See “Motion detection”
on page 71 for more information.
Privacy Mask
Define the on-screen privacy mask areas. See “Privacy
mask” on page 72 for more information.
Camera Tamper
Define the video tampering detection settings. See “Camera
tamper” on page 73 for more information.
Text Overlay
Define the text to be added on-screen to display extra
information, such as contact information. This text is
embedded in the video and cannot be removed.
This can only be defined via the browser.
PTZ Setup
Define the PTZ parameters of analog PTZ dome cameras.
See “Configure PTZ settings” on page 75 for further
information.
BNC/V-stream
Define the V-stream parameters. See “V-stream encoding”
